|
SPLPARTS ARE the BEST
The BMR Parts and I use alot of them are VERY GOOD but make no mistake here, the SPLPARTS are the BEST. The aformentioned SPLPARTS TOE ROD for the REAR is especially a MUST HAVE item. Now running -2.7 camber on REAR because of that use of specific part.
Unfortunately SPLPARTS occasionally have out of stock situations on some of their items. On a 1-10 scale, I would say BMR is an 8+ and SPLPARTS are 9.5+. (no one is perfect, lol)
The BMR adjustible sway bars are very good and I use them both FRONT and REAR BUT you have to purchase a set of BILLETT bearing holders to support the delrin bearings on the FRONT bar if you plan on tracking the car in order to NOT split those bearings under extreme pressure. These bearing holders are 300.00 per SET and have to be ordered separately as a special order item from BMR. BMR came up this BILLET bearing holder when racing teams were complaining about SPLITTING the bearings using the stock bearing holders that come with the bar. Notes on this are below:
BMR Billet Steel Bearing Holders for FRONT Sway bar (SBB010 is a SPECIAL Order part from BMR NOT in catalog, cost is around 300.00)
A BETTER choice if they are available would both the HOTCHKIS adjustible Sway Bars front and rear. HOTCHKIS has had supply issues as well.
|