Quote:
Originally Posted by swisstyphoon
Mine is only 32% also, I know I will not get the max out of the pump with that fuel lobe. My goal is to lower the rail pressure with this pump and injectors (both LT1 based parts) and run E50 to E60. Low side will be upgraded also. If it is not performing the way I'm hoping for, I might install a cam with a 42% fuel lobe later on.
|
Will just come down to wanted HP. KingLT1 has me squeaking by with a 8.4 lower (5%) and 80mm upper with E60. I’m guessing mine is hovering around 1kwhp through an M7. Need to put it on a dyno to confirm. Most builds should bump their compression if running ethanol with a cam. Glad I went to 11:1.