CAMARO6 - View Single Post - Stock Intake Valve Seat Failure on TSP PRC Ported Heads with Big Cam

L78toLT1 · 02-23-2021, 07:17 AM

Try taking a small punch, or better still a brass drift rod and give the edge of each keeper a light rap to dislodge any residue that may be preventing the kerpers from falling off. Sqiirting a little carb cleaner between the gaps in the keepers couldn't hurt either

02-23-2021, 07:17 AM	#62
L78toLT1 Drives: Hyper Blue 2016 2SS 6M Join Date: Sep 2017 Location: North Ga Posts: 1,786	Try taking a small punch, or better still a brass drift rod and give the edge of each keeper a light rap to dislodge any residue that may be preventing the kerpers from falling off. Sqiirting a little carb cleaner between the gaps in the keepers couldn't hurt either __________________ Baby Blue 2016 Hyper Blue 2SS/6m/MRC/NPP/Silver Rally stripes/ZL1 wheels & brakes/GForce DS and axles/ZLE Cradle Bushings/FE4 ARB front & rear/SEMA Grill/Rotofab dry/95mm TB/Magnuson 2300/Full LT4 fuel system/JMS boost-a-pump/E85 Sensor/Ported CID heads from LME/Cammotion PD cam/Thompson Motorsports forged shortblock/catted Kooks 1 7/8 headers /JRE remote tuned