FWIW, I fabricated permanent aluminum ZL-1/Dewhel-style jack pads from some 4545 (1.75"x1.75") extrusion stock I had laying around.
It is very nice to have them always present on the car.
If anyone is interested I could post some photos and dimensions.
All you really need is a hack saw and about $20 worth of 4545 stock or similar and eight 1/4-20 clamp bolts.
4040 stock will also work (I made some for the Cruze) but the larger stock is better for the Camaro IMHO.
__________________
Gen6 Camaro LT (my daily driver), Cruze ECO (grocery getter), Chevy SS Pickup (wife's daily driver), Honda Shadow, Honda CBX
Last edited by DIYguy; 04-15-2019 at 10:10 PM.
|