JDP Motorsports is excited to offer the Metco interchangeable crank pulley kit for the 2017 ZL1 Camaros! Metco's interchangeable crank pulley kit includes Innovators West balancer and Metco's crankshaft ring designed to add boost and horsepower to your supercharged Camaro without making any permanent modifications.
Metco Motorsports - Interchangeable Crank Pulley Kit - 2016-2017 CTS-V/Camaro ZL1 - MET-ICPLT4
Metco interchangeable crank pulley kit for the 2016-2017 CTS-V and 2017 Camaro ZL1 includes an Innovators West balancer and Metco's crankshaft ring.
This crank pulley kit is based on the Innovator's West replacement balancer assembly for the GM LT4 engine. This kit represents a clean and simple way to add boost and horsepower to your supercharged Cadillac or Camaro without making any permanent modifications.
The Innovator's West balancer is precision-machined in the USA and installs directly in place of the factory unit. The IW balancer and crank ring assembly weighs only 12.6 lbs, compared to 16.2 lbs for the factory steel unit. Installation of this kit removes significant rotating mass from the front of the engine.
Metco's CNC-machined crank pulley rings bolt directly to the new balancer using the provided fasteners. Once the balancer assembly is installed, changing the outer ring to adjust the boost level is simply a matter of six the allen-head fasteners. Crank pulley rings are also available separately and are listed elsewhere in this section.
To complete your kit, please choose your desired crank pulley size.
Note: The fitment of the 8.60" (7.5% OD) and the 9.10" (13.6% OD) pulley rings have been confirmed. The use of rings sized 9.55" and larger may require additional parts and/or modifications.
Note: Most of the crank pulley rings can be purchased in a 10-rib configuration for custom applications. This kit does not fit the 2015 and newer Corvette Z06. It is expected to fit the 2017 Camaro ZL1.
Supercharger Belt Lengths:
+2 lbs 8.60" Crank pulley ring and stock idler pulley: 67.5" belt
+3 lbs 9.10: Crank pulley ring and 50mm idler pulley: 68.0" belt
+4.5 lbs 9.55" Crank pulley ring and 50mm idler pulley: 69.0" belt
+5.5 lbs 10.00" Crank pulley ring with 50mm idler pulley and idler relocation bracket: 71.5" belt
+6.5 lbs 10.50" Crank pulley ring with 50mm idler pulley and idler relocation bracket: 72.5" belt (estimated)
Sales Price: $839.98
WE INSTALL PARTS!!
If you are looking to have work performed or have one of our packages installed on your vehicle, we have a facility in Sandy, Utah where we perform everything from bolt-on installations, Dyno testing/tuning and complete race car builds. Our install shop fills up fast, so please call us to set up an appointment.
Best regards,
Kayla L.
801.545.4215