Quote:
Originally Posted by SanDMaN2091
So when it starts getting cold outside I get alot of questions on replacing this tensioner. I figured a picture is definatly worth a thousand words.
DO NOT REMOVE BOLT IN CENTER OF BLACK PULLEY(It is stationary, and ONLY ment to be tightened)
The Manual says 16 ft/lbs(192 in/lbs) torque spec.. I just snug them down and give them a little bump.. the bolts are large, but lightweight and I dont trust them. It's not worth snapping one off in the block.
Hope this helps everyone out. Winter IS typically when electrical issues like to emerge.
|
Brother you Rock!
Ty for the amazing write up should be a sticky