CAMARO6 - View Single Post

CRBWS6 · 07-29-2021, 03:44 PM

I agree with longer studs for 5mm spacers (I tested some and only got about 6.5 turns on OEM SLE wheels).

But is it OK to use stock studs w/3mm spacers? These are required for inside front clearance with some MRR wheels. I am estimating it would get just under 8 turns which I have read on here is sufficient.

07-29-2021, 03:44 PM	#46
CRBWS6 Drives: 18 1SS 1LE SCCA FS, 99 WS-6, E46 M3 Join Date: Dec 2017 Location: PHX Posts: 86	I agree with longer studs for 5mm spacers (I tested some and only got about 6.5 turns on OEM SLE wheels). But is it OK to use stock studs w/3mm spacers? These are required for inside front clearance with some MRR wheels. I am estimating it would get just under 8 turns which I have read on here is sufficient. __________________ Last edited by CRBWS6; 07-29-2021 at 05:26 PM.