Quote:
Originally Posted by KonigWolf
I had random knocks after headers/x-pipe. Talked with a few people an came to the conclusion that the LT1s are a bit noisier than the previous L99.
Adjust the recovery rate, so if it is false knock, it adds the timing back sooner and the threshold tables, so they aren't as sensitive (Cyl1 - Cyl8)
[ECM] 12744 - Knock Retard Recovery Rate: This is the rate at which knock retard is removed in the absence of further knock. The higher this value is the faster knock retard will be removed.
Knock Sensor Threshold Mult Cyl1: Multiplies knock sensor threshold when not in transient mode.
|
Increasing the Knock Retard rate at this level makes the knock sensors COMPLETELY USELESS!