Quote:
Originally Posted by oldman
wow... looks great
|
Thanks
Quote:
Originally Posted by Umbriel
Who built your turbo kit? Not a lot of turbo options out there right now for these cars, especially single turbos.
|
Frumusa Performance built it.
Quote:
Originally Posted by laynlo15
That's the same Manley Pistons/Rods I used and mine is also 10.5 compression. I'm was impressed with the Manley pieces. I've been running my Maggie at about 15lbs of boost, no knock which we had last year with the stock higher compression motor. Shouldn't have the ring land issue I had with the stock motor either. You have a killer setup and should be pretty stellar drag car. Congrats.
|
Awesome results and thanks. We are all really excited to see what it makes and the power difference.
Quote:
Originally Posted by oldman
this turbo is prone to choke on this application, it really is a high boost turbo, medium flow unit. possible a larger frame but with a smaller trim and a MUCH smaller A/R.
|
I sure hope not. This is a pricey unit and I love the way it reacts currently. Very very little lag. Is that compressor map for the standard turbo or w the tial housing?