Quote:
Originally Posted by SHE'Z 18
Hey All,
I don't mean to beat this to death. But, can someone clarify / verify the required amount of fluid needed to do this flush and refill? The reason I ask is because the OP states in the (awesome) instructions that you'll need 3.65 qts. However, JCunningham (post 117) stated that it takes 5.2 Qts. I just want to make sure that I'm not missing something..
also, are you suppose to fill it, start / drive the car, then go back and check the fluid to see if any/some was consumed through the nooks/crannies?
Thanks everyone!!
|
If you want to drain and fill, that's ~4qts.
If you want to FLUSH (drain/fill/drain/fill) in order to get the most fluid exchanged (out of the cooler and lines), then you need more.
The fill and drive is for the diff. You don't use that technique for the Transmission.