Quote:
Originally Posted by Msquared
Not a dumb question. If you look at the specs, you'll see the "rim width" spec for the tire, which tells you what the beads' width is for the unmounted tire. If you mount it on a wheel of that width, the diameter won't change at all. If you mount it on a wider or narrower tire, the diameter might change a teeny bit because the sidewalls are on a slightly different angle. However, I doubt it's more than 1/10".
|
Thank you for the quick response! I definitely appreciate it.
So, if I put a 9.5" in a tire the says 9" rim width it will make the tire a tiny bit shorter due to it stretching it somewhat?
And also at 20-25PSI not 30-35