CAMARO6 - View Single Post - WARNING: Front end Clunk - Loose Sway Bar Endlinks (please check yours)

allenrayn · 11-06-2017, 12:31 AM

Had the same problem. Took it in and the gm dealer replaced the nuts with the new ones. 2 weeks later, the clunking returned. Going to put on nordlock washers myself on all 4 nuts. This is absolutely crazy!

Question: I can't get my torque wrench and socket in the tight space for the lower nuts. I feel like i need a pass through torque wrench. Or a joint piece. How did you guys do it? Thanks!

These are the new nuts. But obviously they did not work.

The 3rd picture (sorry it is flipped 90 degrees) is the old factory nut

11-06-2017, 12:31 AM	#140
allenrayn Drives: SS1LE Join Date: Nov 2017 Location: California Posts: 3	SS1LE loose sway bar end link Had the same problem. Took it in and the gm dealer replaced the nuts with the new ones. 2 weeks later, the clunking returned. Going to put on nordlock washers myself on all 4 nuts. This is absolutely crazy! Question: I can't get my torque wrench and socket in the tight space for the lower nuts. I feel like i need a pass through torque wrench. Or a joint piece. How did you guys do it? Thanks! These are the new nuts. But obviously they did not work. The 3rd picture (sorry it is flipped 90 degrees) is the old factory nut Attached Images Last edited by allenrayn; 11-06-2017 at 01:58 AM.