Quote:
Originally Posted by Kingpin2k7
Ok gotcha. I did the axle back too, I am not sure how 60606 mates to the suitcase. It may have to be welded. Sorry I couldn't help.
|
I am going to use this to connect the 60606 to the suitcase:
https://www.summitracing.com/parts/vpe-1176
This is my thought:
1. When installing the Borla Axle back you cut out the suitcase at the 7" mark to attach the new axleback to the stock midpipe.
2. And I also know that the Borla axleback mounts to the 60606 fine
therefore
3. I am thinking that the 60606 will mount to the suitcase, if I make the same 7" cut but keep the suitcase and remove the midpipe
Almost like if A=B and B=C then A=C...but different lol