|
You will only get a CEL if you have AFM (A8 Trans) valves, or you have a leak in your exhaust.
The 60606 bolts directly to the stock factory system behind the Primary Cats. The suitcase portion of the factory NPP system however will have to be cut in order to mate to the female end of the 60606. If you were installing an axle back you would just connect the pieces with the clamps provided with the axle back system.
**Making the cut will make the install easier. But if you have intentions on going back to factory exhaust you may want to avoid cutting it to keep the stock system whole to avoid having to weld it back should you need to put it back on**
|