|
Called up Matt as soon as I saw this thread...glad I did! This was my first purchase from him and my experience and service was great! Just a quick install note, I used Meguiars PlastX clear lens cleaner and polish, followed my Meguiars Show Car Glaze #7. Both were applied with Mother's Power Ball, just a few passes and you"re finished. When removing the OE Brake light, you do not have to open the trunk, I used a heat gun to soften up the sticky backing and a plastic pry tool and it popped right out. That heat gun is a handy tool to have around, I also used it to apply the black carbon fiber vinyl to the bowtie. I plan on getting a painted one eventually but this came out really nice, I might just keep it.
|