|
People are making this harder then it has to be. Empty glove box, on the right side slide clip forward to unhook, use a wonder bar (one inch wide pry bar) and place directly in middle of the left edge of box and put just enough pressure to visibly see the one inch wide "block" clear the lip that holds it in place, keep just enough pressure to keep from falling back in place and do the same on the right side. Once you clear the lip on the right side the box will swing down. There are two clips on the bottom of the filter cover that hold it in place, unclip and pull out cover, change filter and reverse. It took longer to empty the glove box then to change the filter.
|