Quote:
Originally Posted by Can'tHave2MuchHP
2.31 and 18%? That's past recommended. You can do it, I've seen it done, no worries, but just be prepared you're going to have a lot of heat. An expansion tank/ice box will be a must. E85 will help but no too much. Since you're going to be running meth, you will be fine as long as it's installed right.
Your list is very solid, good choices of manufacturers. Kooks, Metco, Lingenfelter, Katech, Vengeance etc is all top of the line. I'd recommend Dave @ DSX/DMS tuning for your E85 sensor and pump, he's got the best in the game.
You should be well over 715 RWHP, I would say 740 RWHP. Maybe more. If you had your blower ported and your heads done you'd nearly be at 800 RWHP. If your car responds like any of the C7 Z06s I've seen get a very similar list, you'll likely be at 800 RWTQ too.
There's going to be a huge issue with your build....TRACTION, Lol! No seriously you'd better plan on some 17s or 18s with a good drag radial.
|
I’m hoping to get the meth plumbed through the new lid sometime next year.
And I have the DMS kit for my sensor and and pump kit.
Also. I have been looking into 17s or a 15” conversion kit!