Quote:
Originally Posted by toohighpsi
Joe, if the headers help you to flow more air, MAF will measure this and add the appropriate amount of fuel and adjust timing as well as both of these are controlled off MAF. It may not be perfect for peak power, but it will be directionally correct.
The only thing that could cause problems is if you end up with a leak before the narrow bands which will skew your long term trims any possibly make you run rich/lean.
|
Thanks Mike. I'll definitely get her figured out and post my findings.
__________________
2017 1LE SS Black - Mods - Forged - lowered compression - BTR custom Cam - Whipple, 3.500 upper and 8.0 lower pulley, Roto-Fab, 1 7/8 Kooks headers, off road pipes, & 3" Kooks full exhaust. LT4 fuel system, with Alky single nozzle running 100% meth. (not installed yet) DSX Tuning flex fuel and DSX tuning Aux pump
|