|
I took a look from the top side at the gaskets (what I could see). Looked okay but not sure looking is suffice lol. Didn't do the install myself but man that passenger side is tight... very tight.. Guessing that coolant reservoir has to come out to get to the passenger side header. I've got a torque wrench to check if they are where they need to be but if I have to pull the tank out to get to it guessing it's probably best to just loosen them and replace the gaskets.
__________________
2017 1LE SS Black - Mods - Forged - lowered compression - BTR custom Cam - Whipple, 3.500 upper and 8.0 lower pulley, Roto-Fab, 1 7/8 Kooks headers, off road pipes, & 3" Kooks full exhaust. LT4 fuel system, with Alky single nozzle running 100% meth. (not installed yet) DSX Tuning flex fuel and DSX tuning Aux pump
|