CAMARO6 - View Single Post - Magnuson is posting 6th gen TVS2650 teasers on FB.

laynlo15 · 08-13-2017, 09:29 PM

We just changed to the High Pressure Pump in mine so I can reap the benefits of being able to run more timing with my MS109 and Water/Meth Injection without running out of fuel and we are expecting 10.30s or quicker out of this package at close to 140 mph and going from the 90mm pulley to the 80mm and around 12 lbs of boost. I've run 10.700@133 with the 90mm in the heat. I plan on maxing this 2300 out also. The 2300 can easily make 730 RWHP or more with the stock internals as the Magnuson Camaro has done. If you've been by one of our displays at some of the events, Camaro Fest, Hot Rod Power Tour you might have noticed that there may be a dual TB in the future also. Hopefully Mike will chime in on the 2650 that was shown on the Mopar on facebook since he is the expert on whats out and coming out in the future.

08-13-2017, 09:29 PM	#5
laynlo15 Drives: 2022 Lt1 A10 Join Date: Nov 2015 Location: clark, mo Posts: 8,882	We just changed to the High Pressure Pump in mine so I can reap the benefits of being able to run more timing with my MS109 and Water/Meth Injection without running out of fuel and we are expecting 10.30s or quicker out of this package at close to 140 mph and going from the 90mm pulley to the 80mm and around 12 lbs of boost. I've run 10.700@133 with the 90mm in the heat. I plan on maxing this 2300 out also. The 2300 can easily make 730 RWHP or more with the stock internals as the Magnuson Camaro has done. If you've been by one of our displays at some of the events, Camaro Fest, Hot Rod Power Tour you might have noticed that there may be a dual TB in the future also. Hopefully Mike will chime in on the 2650 that was shown on the Mopar on facebook since he is the expert on whats out and coming out in the future.