[Stephen12ZL1]

looks like hose connecting the top of the intercooler pump to the manifold needs to be removed...the rearmost one with the vacuum bleeder connection. It has a little purple clip that must be removed first. The lower connection at the intercooler pump has a constant tension clamp. Remove this hose and store in a safe place. The intercooler reservoir may be mounted now on the strut tower brace location with the included hardware and the factory brace bolts. The front/lower nipple on the reservoir is for the new hose that has a 90° with no purple clip connection...go from the top of the intercooler pump to this front/lower nipple. The rear/top connection is for the return hose that has the purple clip connection on the water manifold end. Route as the pic above shows. Make sure routing of the hoses doesn't interfere with the engine belt or anything hot like the exhaust manifold. Place hose bracket as the above pic shows. Tighten worm gear clamps and refill system. Use black nylon tie straps to ensure clearance around everything. Check for leaks!