Quote:
Originally Posted by Gunkk
Use some flat waxless dental floss - close it in the window in various spots. It should be hard to pull through. Slide it along until you find it easy to move back and forth: and you have your leak. Then check the rubber nearby to make sure it's seated/slotted correctly...
|
Well I know it's near that triangular part...... it also has a bit of hardness to it......
the thing is I never had that problem before....... so why did it go from one drop to 6 drops all of a sudden?
I took it to one dealer and they "shimmied " it into place...... Now it has some kinks on the stripping but now at least it stops the water from coming through..
Also the weather stripping after they "fixed it", now gets wet, ( as in you it hangs onto the water on the upper edge of the frame ) when you roll the window down.....while on the passenger side which is untouched from factory does not get wet / hang on to any water at the same time when the car gets wet...
Will this be okay or Should I take it to another dealer and have them take out the stripping and install a new one?
I just don't want any water to build up anywhere near the seam or weather strip nor on the frame which can lead to rust down the road.
What happened to quality control?