|
Unfortunately no, but the blower is easy to remove, there is a a few things to be noted.
1. The IC cooling system is a closed circuit and can only be vacuum filled using a special fitting no other method will work. ( i took mine to the dealership after i put the car back together and had them bleed with distilled and water wetter)
2. You cannot re use any of the supercharger to head bolts as they are stretch bolts.( I broke one off, no one seems to want to tell you do not re use, several Z06 DIYs and shops said otherwise) The dealership should sell a "kit" for less than 200 including all new gaskets and bolts etc.
3. Make sure the surface between the snout and blower is thoroughly cleaned and you only use the AC Delco engine sealant
4. Ask the parts guy to nicely print you the SI procedures for the blower/ cover removal so that you have all torque specs.
Here is what I have spent
Pulley installed/Belt/sparkplugs/shipping to & from VR- $420
Cooling system bleed- $159
Gaskets and sealant- $149
Rotofab CAI- $506
Mamo TB- $375
DSX Flex fuel- $400
Tune- $1200
|