Quote:
Originally Posted by nick_casper
Mine makes 8 PSI with a 3.25 pulley at 5800 feet - exactly what it should. I think stock kits are getting 8 to 9 psi at sea level DA. Your other mods will lower your boost a bit from stock. If the fuel system supports it you may be able to go to a smaller pulley and really crank it up. Your builds getting real now. You'll be kickin ass soon.
|
I knew I'd loss some boost. As far as HP and TQ with the 3.5 pulley might be better now. They seem to run better on 8 cylinders rather then 7. Tuner left a plug wire off (good help is hard to find)
Now is the wobbling input shaft, then I'll drop to 3.125 pulley.
https://youtu.be/_AyKyJegfj0