Hi all! I'm new to the Camaro family (I'm a Mustang transplant) and just picked up my 2017 ZL1 this past Monday. I love the car so far but did notice right away after getting home the clunking in the front end. I will be checking the swaybar links today at my shop. One of the guys on here was asking about the proper torque for the end links. Here is a copy of the TSB listing those #'s.
CLUNK NOISE FROM FRONT SUSPENSION AT LOW SPEEDS
TECHNICAL SERVICE BULLETIN
Reference Number(s): PIC6276, Date of Issue: Mar 27, 2017
SERVICE INFORMATION
Chevrolet Camaro 2017 All All LT1, LT4 All
Involved Region or Country North America
Additional RPO/s: FE4 suspension
Condition Some customers may have a concern where they hear a clunk or rattle noisecoming from the front of the vehicle when hitting bumps.This can typically be heard while driving at parking lot speeds and hitting imperfections or speed bumpsin the road.
Cause This noise may be caused by the front stabilizer bar end link nut(s) loosening up which may cause the stabilizer bar end link(s) to make a rattle noise.This can happen on either/both side(s) of the vehicle.This noise can easily be mistaken forafront strut and/or strut mount assembly noise.
CORRECTION
Dealership technicians are to inspect the upper and lower stabilizer end link nuts for proper torque. The lower nut should be torqued to89 foot pounds (120 NM) and the upper nut should be torqued to 74 foot pounds (100 NM).If the upper nut is found to be loose, tighten the nut to spec and submit a Field Product Report per bulletin 02-00-89-002. (Canadian dealersshould refer to bulletin 10-00-89-006).
PARTS INFORMATION
No parts will be needed for this repair.
WARRANTY INFORMATION
Labor Operation
Description
Labor Time
8080278* Inspect and Torque Front Stabilizer Bar End Link Fasteners 0.4 hr
*This is a unique Labor Operation for Bulletin use only.
