Quote:
Originally Posted by brettman
I have the most recent, revised, however it doesn't say much. What I did was jumper replay, 30 and 87 term. and let it run. I don't know if thats right (as per Whipple)...lol. But it worked to bleed air out. I let the pump run for some time.
I'll dig the instruction up and send if you'd like (not much good) Let me know
|
Well I took a stab at it and got a bunch of air that was in it out. Not really sure on what you were saying so I took off the cap (which had a bit of pressure when removed). Filled it up, squeezed the hoses to pull out some air. Then left the cap off and had the wife start the car which then more air came up and then water came to the top so I had here turn it off and filled it up again. I repeated those steps until I saw no more air coming up. 
__________________
2017 1LE SS Black - Mods - Forged - lowered compression - BTR custom Cam - Whipple, 3.500 upper and 8.0 lower pulley, Roto-Fab, 1 7/8 Kooks headers, off road pipes, & 3" Kooks full exhaust. LT4 fuel system, with Alky single nozzle running 100% meth. (not installed yet) DSX Tuning flex fuel and DSX tuning Aux pump
|