View Single Post
Old 05-16-2017, 06:45 AM   #3
Dysan911

 
Dysan911's Avatar
 
Drives: 2017 50th Anniversary 2SS
Join Date: Sep 2016
Location: Jacksonville, FL
Posts: 930
Quote:
Originally Posted by JoeAyalaM View Post
It is needed, the head's ventilation has an air-oil separator, but there is nothing for the crankcase ventilation.

You would install the CC between the crankcase and the check valve, before the vaccum manifold and from there to the Air Filter. You will need longer hoses and a place to put the bracket and CC itself, there is plenty of room in the right (passenger) side of the engine compartment.

Cool ok thanks. I'll figure out how to get it mounted. Mine definitely catches oil. I think my oil monitor was at 50% and I checked it and got a few ounces out of it. Otherwise, would have been sucked into the intake and not only lower the octane but also gunk up my valves.
__________________
Former Ride: 17 Camaro 2SS, M6 - Fifty | Procharger P1SC | 3.7 Pulley | Stage 2 IC | Race Bypass | DSX FF Kit | JRE Custom E85 Flex Fuel Tune | LT4 Fuel System | JMS Voltage Booster | MSD Plug Wires | American Racing 1-7/8's LT Headers Full System Catback | Baro Breakout Harness | LT4 Map Sensor | Katech Ported TB | MMS Oil Catch Can | 160 Thermo | Solo Performance J-Pipes

Dysan911 is offline   Reply With Quote