CAMARO6 - View Single Post - Brake options for track on ZL1

OminouSS · 05-05-2017, 02:07 PM

Ryephile. I know you're stopping by so to answer your question from the other thread: Several consumed OEM pads and two rotor sets. Now Ive moved to aftermarket, per the story above. The first pads I tried were full metallics. They are going for a proprietary street/track compound that is used on the CCM's. I think they're onto something there. But they are keeping that R&D private for now. The pads I wrote about are a different compound than the full sintered. Hopefully Warren can confirm but I think the part # is PD1395-41. I used their semi-metallic in the back. Part # PD592-397. Great compliment to the track pad up front. It improved trail-braking measurably (no pun intended) and did not EFF with eLSD or ABS.

05-05-2017, 02:07 PM	#3
OminouSS Drives: Red Hot track candy Join Date: Oct 2009 Location: NorCal Posts: 1,092	Ryephile. I know you're stopping by so to answer your question from the other thread: Several consumed OEM pads and two rotor sets. Now Ive moved to aftermarket, per the story above. The first pads I tried were full metallics. They are going for a proprietary street/track compound that is used on the CCM's. I think they're onto something there. But they are keeping that R&D private for now. The pads I wrote about are a different compound than the full sintered. Hopefully Warren can confirm but I think the part # is PD1395-41. I used their semi-metallic in the back. Part # PD592-397. Great compliment to the track pad up front. It improved trail-braking measurably (no pun intended) and did not EFF with eLSD or ABS. __________________ Baby born 11/08/16. Left birthing place 11/25/16. Arrived home 12/6/16: '17 Red Hot ZL1. Stock. Last edited by OminouSS; 05-05-2017 at 02:18 PM.