Quote:
Originally Posted by nick_casper
Whipple did make some changes that I requested. They were great about it, but use some sugar when you ask if you want your tune modified. I sent my two codes to tech support. They were likely caused by a parameter that monitors throttle position in relation to airflow. They sent me a new file and it seems better so far but I only have one short drive. There is a tech support email address at the back of your install manual. Keep in mind permanent codes require a specific drive cycle to clear. Google how to clear permanent error codes to see how to do it.
|
Do you have the code numbers for the 2 codes? One is P0121 i assumed.. I emailed, but no response yet.
Do you.mind if I ask you to send the new flash? Ah, the file from Whipple is locked, but you can read it from PCM and can make a new file of flash.
To remove the 2 codes, I tried to change MAF , throttle body, Roto-fab...ect related to Throttle and MAF , but not working. Eventually it is from Mapping data.
Could you check if they change the code as "not reported" in the option? You can find it DTC manu in VCM editor.
Thank you.