Quote:
Originally Posted by nick_casper
Message me if you have any questions during your install . Sit down and make a plan for mounting the coolant tank and heat exchanger. The instructions leave out a lot of detail there. I drilled through the crash bar and used 7" 5/16 bolts to mount the coolant tank. You may want to sleeve the plastic bores with tubing to prevent the tank crushing from the mounting bolts. The heat exchanger mounts in a way that is impossible to get to without trimming some plastics or a lot of major dissasembly. Another tip, have the adjustable pulley mounted to the bracket prior to install. It uses a sliding nut on the backside that is very hard to get to and falls into a bad spot when dropped  |
Thx Nick between you and Brett I think we'll all be helping each other through this to a degree. Much appreciated.