Quote:
Originally Posted by devnull
This is really awesome. THANK YOU for posting this, I was thinking about these same rings and although the math for these being the same as a C7Z is there, I wanted to see it too! I had DBA's for my C7, and they were great. WOW! That's awesome.
Guess I'm buying a torque wrench too, new tool!
Thanks glamcem!
|
You're welcome
Quote:
Originally Posted by TrackClub
Good news - thx for posting. Since there are no official 1LE fitments specified, how did you go about ordering the right size? Sorry if I am missing something obvious here. Thx!
|
Sure. As devnull mentioned they're the C7 Z06 (iron disc non Z07) rotor rings. X25 sent me the link at KNSBRAKES
https://www.knsbrakes.com/c/car-seri...2FCorvette+Hat
Part numbers are as follows:
DBA52770.1LS
DBA52770.1RS
Quote:
Originally Posted by jayman33
Do you have the part number on the DBA?
Fantastic write up as well, great job!!
|
Thanks, Please see above reply. I will also update the OP, thanks for reminding
For those who are planning to replace the rotors, please keep in mind that these are torque to yield bolts and it's advised to use new bolts at each service. I used lock washers and torqued them to 90 lb/ft but will also order new set of bolts for the next change.