CAMARO6 - View Single Post - WARNING:High RPM hesitation/surging issue solved. See pictures and check yours!

SuperSound · 04-10-2017, 08:07 PM

More pics from my borescope camera. It's crappy quality b/c it's only like 1-2MP camera. Can't get enough room to get my phone in there for pics.

#1 shows the 2 wires running from the A/C compressor which are at least 3" from the belt
#2 shows looking from the belt to the harness plug all 3 wires connect to
#3 top angle of the belt looking at the 3rd wire which I believe is the same one OP had damage too (can't tell where it goes from this harness). About 2 inches of space and below the belt.
#4 tried to get some better light and a farther shot of the 2 wires/belt
#5 That's the plug all 3 wires go into. It does not look like a crank position sensor and seems to be attached to the side of the EPS.

Sent from my SAMSUNG-SM-G920A using Tapatalk

04-10-2017, 08:07 PM	#23
SuperSound Drives: '17 Camaro 2SS A8 Join Date: Jan 2015 Location: Eastern NC Posts: 5,063 View My Garage	More pics from my borescope camera. It's crappy quality b/c it's only like 1-2MP camera. Can't get enough room to get my phone in there for pics. #1 shows the 2 wires running from the A/C compressor which are at least 3" from the belt #2 shows looking from the belt to the harness plug all 3 wires connect to #3 top angle of the belt looking at the 3rd wire which I believe is the same one OP had damage too (can't tell where it goes from this harness). About 2 inches of space and below the belt. #4 tried to get some better light and a farther shot of the 2 wires/belt #5 That's the plug all 3 wires go into. It does not look like a crank position sensor and seems to be attached to the side of the EPS. Sent from my SAMSUNG-SM-G920A using Tapatalk __________________ Current: '17 2SS Hyper Blue, A8, MRC, NPP Past: '99 SS Camaro A4, '73 Camaro 383 A3 "Voices in your head are not considered insider information." 3800 Status - 6/16/16 (Built!) 6000 status - 6/29/16 (Delivered!)