Quote:
Originally Posted by FdeleonZ28
it does not set a code but after cold soaked it stumbles at low rpm normal driving.. is that normal with these plugs?
|
FYI. I'm seeing a lot of resources that recommend closing the gap to .030 to help smooth out rough idles. I think that's worth a try. .030 is definitely recommended for a forced induction setup like mine, and I'll be installing these plugs with a .030 gap tomorrow.
http://www.morepowertuning.com/NGK-6510-8x
"Out of the Box Gap: .044 (1.1mm) (Recommended gap .028 to .032 for Forced Induction)"