Quote:
Originally Posted by LesBaer
Dude you've gone way way overboard with this for a street car. Just drive it and see what it needs. If you roll race you may not need to do this stuff. The stock axles and driveshaft can support 700rwhp and I've had no problems so far. If it brakes then replace it so you don't waste the good GM parts already on the car. Same goes with the clutch. Wheel hop and tires are a different story though. At the power levels you'll have with this, you're going to need the right tires and rear upper and lower trailing arms that come with bushings since the wheel hop will damage the car. I really hope this works out for you. Good luck with everything!
|
Thanks a million sir, hopefully I can achieve close to your numbers. I already have an upgraded clutch but didn't know if it will hold lol. I wanted the suspension and axle mods for the rare times I would track it and/or dig race. Tires will be handled within the next 2-3 weeks I'm hoping (probably going with mmr z28 replica's or Zl1 rep's with 305 nitto's in back). Need something that will grab (within reason) as this car is a 100% daily driver and not a garage queen although it will be garage kept.