|
I will just assume you are sending your IM/TB to me for porting so I will help you out.
The swap is really easy actually. I can do it in about 15 minutes now.
Pop your Camaro covers
Pop your wiring harness from the gray cover before you un bolt it
Remove the gray cover
Leave the black cover under the gray cover for now (remove it before you ship)
Leave your brake booster hose connected at the rear of the manifold and disconnect it under the A/C line (remove it after you have the IM out)
You can leave the TB connected at first, just get the connector off
Leave the air box in place and just remove the elbow
Disconnect the EVAP solenoid
Loosen all of the IM bolts and hold them up with the rubber bands
Take the TB up and to the right and the IM will slide right out
Separate the IM/TB wrap up tight and ship
That's about it.
|