CAMARO6 - View Single Post - Front plate dilemma SOLVED

gblaue · 01-28-2017, 01:51 PM

Another option is the sto n show bracket for the 2016-2017 Camaro, with a small modification. The mounting bolts need to be moved inward and forward on the mounting plate.

I placed a center line front to back. The mount bolts need to be ~7.75cm from the center line of the bracket. The bolts need to be ~1.25-1.5cm in forward, with respect to the original mounting holes. This will put the plate ~1/2" in front of the peak of the air splitter. I put a piece of 3/4" foam between the plate mount and the air splitter, to reduce any chance of rattle. The stock screws seem to be long enough.

One note, in addition to the instructions above. Turn the mounting bracket around 180 degrees. The straight edge, now, goes toward the rear.

Or, you can wait for them to make the correct bracket.

01-28-2017, 01:51 PM	#5
gblaue Drives: 2017 Bright Yellow ZL1 6spd Join Date: May 2010 Location: Central MA Posts: 660	Another option is the sto n show bracket for the 2016-2017 Camaro, with a small modification. The mounting bolts need to be moved inward and forward on the mounting plate. I placed a center line front to back. The mount bolts need to be ~7.75cm from the center line of the bracket. The bolts need to be ~1.25-1.5cm in forward, with respect to the original mounting holes. This will put the plate ~1/2" in front of the peak of the air splitter. I put a piece of 3/4" foam between the plate mount and the air splitter, to reduce any chance of rattle. The stock screws seem to be long enough. One note, in addition to the instructions above. Turn the mounting bracket around 180 degrees. The straight edge, now, goes toward the rear. Or, you can wait for them to make the correct bracket. Attached Images __________________ 2017 ZL1 Bright Yellow w/ black center stripe, 6 speed, CF gas door, PDR, Navi Last edited by gblaue; 01-28-2017 at 02:42 PM.