You may be mixing up the numbers.
60606 mid-pipes & secondary cat-delete / no AFM
60607 mid-pipes no cat-delete / no AFM
60609 mid-pipes & secondary cat-delete / with AFM
60610 mid-pipes & secondary cat-delete / with AFM
The ones with the secondary cat deletes (60606 & 60609) the left side slides over (lap joint) and the right side flanges up to the primary cat.
The ones with no secondary cat delete slides over on both sides with lap joints and then you throw a clamp over them.
Check out Page 2 & 3 for the diagrams, it'll make more sense. Page 2 are the two non-AFM mid-pipes, Page 3 are the two with AFM mid-pipes.
Quote:
Originally Posted by KyBoy
Thanks, I had looked at that pdf 3 or 4 times and neglected to see that install. It says the 60606 slips on the cut ends and it shows the 60609 slips on the factory end and flang. I was under the impression that the only difference between 60606 and 60609 was the AFM module?
|