I think the determining factor on the replacement is the black sleeve. If it is present, you skip replacing the line and perform only steps 4-6 and 10. If the black sleeve is NOT present you perform all steps including the line replacement. Document really doesn't say to check for clearance where the pipe goes over the catalytic converter brace bracket. Seems mandatory if black sleeve is NOT present. Had mine performed last month. Build date was 2015. I know they didn't replace the line. Will be checking this weekend.
2. Determine if the transmission fluid cooler inlet pipe has a black sleeve on it where the pipe goes over the catalytic converter brace bracket (1).
If a black sleeve is NOT present, proceed to the next step.
If a black sleeve is present, proceed to steps 4-6, and 10.
|