Quote:
Originally Posted by JaxChris
Nice catch, oldman.
The LT1 has 1.8 rockers. The GMPP heads for the GM "hot cam" uses 1.81 rockers. The old SBC LT1/LT4's used 1.6 rockers. I see the wrote LTVVT for the engine type, but I would call and confirm with them that it was cut for 1.8 rockers and ask them to ship an accurate cam card.
|
great catch guys on the phone with them now. I am using my stock rockers but got the trunion upgrade. Cam is 235/244/656/651/116+4 lsa. After talking to Vengence and my builder they are figuring I'm going to be around 800 to the crank. I'm not at all mad about it but now I need to look into pistons as this is my daily driver and I beat the sh*t out of it and make plenty of trips to Mexico aka "area 51". More to come later guys and thanks for the catch.
I am using lt4 unported heads btw so this cam will work perfect.