|
You will need the following...
- 3/8" QD fuel line disconnect tool (these are found at every auto parts store). This is used to remove the factory hose that crosses over the intake manifold cover. This hose will not be re-installed.
- a simple crescent wrench or open end wrench to loosen the ground bolt/lug by the fuse box so that the ground ring terminal can be installed.
That should be the extent of tools. I WILL have a nice installation guide put together but it may not make it in time to for the first batch. I will help out in any way I can in the mean time. It's a pretty strait forward install and the guide I wrote before is very applicable.
Tim
|