View Single Post
Old 11-23-2016, 08:23 PM   #18
17CamaroZL1
Life's Short, Live Fast!
 
17CamaroZL1's Avatar
 
Drives: 2017 Hyper Blue A10 ZL1
Join Date: Nov 2016
Location: London, KY
Posts: 2,017
Quote:
Originally Posted by OminouSS View Post
got it. So, anybody considering going down to 19 and doing squared? I have to think the 305/30/20's will fit up front, hence so will a 305/35/19. That would not be a bad squared setup. I'll swap the rears to the front and check fitment in a week. Car is supposed to arrive on the 28th.

I'll probably start a thread on this unless you guys have some answers?
I'm curious how the 305 will look on the front. I have a feeling it will make the car look even better. It will likely stick the sidewall out a little further like the 5th gen zl1 and the tire being a little taller will help with the gap over the front tires. I'd also like know what a wider rear tire would look like and how wide would fit. A 325 maybe? Of course that would probably require wider wheels.
__________________
Life's Short, Live Fast! Bone Stock https://youtu.be/rTUv2p4T7OA 10.94 at 128 mph, 11.13 at 127mph 870 DA, https://youtu.be/e_X_LcpFp50 11.19 at 127mph 1100 DA
Full exhaust, lower pulley, E35 -10.36 at 133 mph 690 DA straight from the street with a slight spin at launch.
TZQPHG '17 ZL1 HBM|A10|Nav|PDR|CFW Hood|ZL1 Mats

12/26/2016 Ordered!
2/8/2017 Built!!
3/2/2017 Brought Home!!!
17CamaroZL1 is offline   Reply With Quote