Quote:
Originally Posted by 2SSRS@Gen5diy
Pulled out my overhead console in the 2SS, so this may not work for your car, if you use the PU/W color wire from the rear connector, that wire is switched, here are some pics.
|
This info was so helpful. I didn't feel comfortable tapping into the ECM for switched power. I didn't even have to cut into the purple / white wire. I tinned the end of the stripped wife with solder, press fit it, and zip tied it to the purple wire.
For those removing the over head console, do not pry at the edge close to the windshield. There are tabs that slide into the head liner. The clips to remove the piece are toward the back of the car and are closest to you when you're sitting in the seat.