[Hyper1SS]

Ok. Got up this morning to get the Camaro ready for the car show tomorrow. Took it down to my local car wash to wash and spray off my wheels. Took it out for a drive (around 35 minutes) to blow the wheels dry and see the difference after the Roto-Fab cold air intake install. If this is like the 5th Gen and needs time to learn the new upgrade and air flow...I can't wait. Just my opinion but with the NPP exhaust it sure woke this car up and the exhaust. I had it in tour mode at first and switched to sport mode and that thing came alive and for sure had a deeper roar to it with the intake installed and more air getting sucked in. At idle and at acceleration. It seemed to have a better pedal response and more power when hitting the gas from a stop or roll. This intake is a must have for anyone that wants to add bolt on hp and a clean and better look than the stock black box. Roto-Fab done a excellent job in craftsmanship, appearance and using all space available on that side. Glad they took their time and was not in a rush to push it out the door to beat everyone else. With more R&D time they were able to get what they wanted out of their intake system and even decided to move away from their prototype and go with a bigger box and filter. In my opinion this box is 2nd to NONE and I am confident when the independent numbers come out from the various speed shops that this will be on top for the most hp and torque for a bolt on cold air intake. If it does not truly produce 10+ hp I will be totally shocked. I want to thank all the people at Roto-Fab in the shop, service and design team for the excellent job well done. Enjoy all that has purchased this system