|
Pictures of installed Roto-Fab cold air intake
One other thing make sure when after building the box with MAF tube and bracket and you first install it into the grommets to be fully seated reach your hand into the box and make sure the vent hole and the rubber vent in the car are seated properly otherwise it will not seal right. When I put mine in it was seated in all three grommets but when I moved to the front of the car and looked down in between the box and that vent I could see the vent seal was not wrapped around the felt like is was supposed to on the box vent opening. My last picture above is how it should look.
__________________
2016 Hyper Blue Metallic 1SS M6 with body color hood vents, Silver broken 5 spoke wheels, NPP dual exhaust, Dark Night Interior Spectrum Lighting, Illuminated door sills plates.
Upgrades include: Roto-Fab intake, Mishimoto catch can, MBRP cat-back Race exhaust, TSP 1 7/8 headers, EFI E85 Flex Fuel, MRR M017 graphite wheels with Nitto N555 G2 tires, Goodridge stainless steel brake lines, Powder coated Brembo calipers, BMR suspension, Eibach sport springs, Emblempros fender badges
Order ID: TDHQMS
1100 on 01/07/2016 at Penske Chevrolet
6000 on 02/23/2016 Delivered to customer
|