[tejesh83]

Originally Posted by Emoto

The Blend mount looks really nice, but it sure is expensive.

I found this one and may give it a try: https://www.amazon.com/PerformancePa...dp/B0063N7UGA/

I used a similar mount for my Escort Max 2: https://www.amazon.com/gp/product/B0...?ie=UTF8&psc=1

It took some trial and error to position it just right, but I found it worked best if you mount the radar to the left of the mirror stem instead of immediately below/centered. Check out the pics.

For folks following this hard wiring guide, I ended up redoing my connections and soldering the wires instead of just pushing it into the connector. My radar detector fell a few times off the suction cup mount and the wires eventually tugged loose. With the new mirror mount and soldered connections, hopefully this is a permanent install now.