Quote:
Originally Posted by R3DLT1
I removed all the following bolts n hood bump stops The green ones remember how they came off. It gave me about 1 inch of room to get a flat head screw driver or a long prying tool
|
Quote:
Originally Posted by Tedsta
I did exactly this and my bow tie looks amazing however when trying to put back the metal and plastic piece, the hood doesn't sit flush anymore with the bumper.
I can't seem to figure out what exactly went wrong, whether I bent/damaged the plastic/bumper from seating properly.
Any help would be appreciated thanks.
|
Check the bold part in the first quote, I believe that is your key. Those are height adjusters. Looks like you may not have them adjusted properly from your photo. That area should be flush/flat.