Quote:
Originally Posted by TenSeven
I just learned the throttle pedal and base are a unit that is very easily removed. On the base of the throttle assembly, pop off the rubber cover and remove the 10mm bolt. slide the whole assembly back about 1/2" and it's freed from the floor.
Now you can easily access the plug and wiring you need to replace for the VTC installation.
|
I also did this when I installed my VTC. The best reason to do this is it gives you access to the factory hole in the carpet to run (hide) the VTC harness, unless you prefer the ghetto look of the harness running on top of your carpet.
__________________
2016 Camaro 2SS: Garnet Red Tint Coat, Jet Black Interior, A8 Auto, MRC, NPP, Nav and 5-Split Spoke Silver Rims.