Quote:
Originally Posted by chris227
Did you install it or have a shop do it? Did you weld it or use the clamps? ordered my yesterday and am trying to decide to either do it myself or take it to have it done.
|
I did it myself, backed the camaro up on drive on ramps, got under, measured and marked the spots to cut, removed the 2 nuts on each side holding the rear hanger mounts.
Used a saw-saw to cut, Then popped the front mounts out of the rubber holders, then while supporting the muffler, slide the rear hangers off and dropped the muffler out.
Then deburred the stock pipe and slide the clamps over the stock pipes. Hung each muffler, tightened down the rear hanger and made sure each muffler were equal and tightened the clamps(says you can add a 1in weld to each side to secure firmly is needed).
That was it, i'd say only took about 30-45min