CAMARO6 - View Single Post

Copperhead · 05-20-2016, 05:56 AM

Thanks SDG23. The dealer logo is long gone.
Unfortunately, the vinyl items ordered from 6LE were a waste. I have never been good applying vinyl, so I took the car to my local tint and detail shop to get the decals applied. I watched the owner struggle with the hash marks through the window inside the store, so I walked out to see what the issue was. He was having trouble getting the marks to line up with the fender body line and the top where it gets close to the hood. It would match one or the other, not both. After a few more minutes I just told him to do what he thought worked best, so he lined it up with the fender line. I hated that it wasn't perfect and pulled them off after 2 days.
Then the small black stripe between the taillights was all wrong. Centering the precut bowtie, the stripe was longer on the right than the left. 1/8 inch of silver was showing on the left and the stripe completely covered the right side. He patched it to look the same temporarily and will be removing it and doing his own stripe for $50 that will not expose any silver around the bowtie or at the ends.
I ended up not being a fan of the grille accents, so I took them off too. The only thing I ordered that I liked and/or lined up properly was the tinted taillight inserts from Bigworm. I highly recommend those.

Sent from my SM-G920V using Tapatalk

05-20-2016, 05:56 AM	#6
Copperhead Drives: 2016 Camaro 1SS Join Date: Apr 2016 Location: Columbus, GA Posts: 33	Thanks SDG23. The dealer logo is long gone. Unfortunately, the vinyl items ordered from 6LE were a waste. I have never been good applying vinyl, so I took the car to my local tint and detail shop to get the decals applied. I watched the owner struggle with the hash marks through the window inside the store, so I walked out to see what the issue was. He was having trouble getting the marks to line up with the fender body line and the top where it gets close to the hood. It would match one or the other, not both. After a few more minutes I just told him to do what he thought worked best, so he lined it up with the fender line. I hated that it wasn't perfect and pulled them off after 2 days. Then the small black stripe between the taillights was all wrong. Centering the precut bowtie, the stripe was longer on the right than the left. 1/8 inch of silver was showing on the left and the stripe completely covered the right side. He patched it to look the same temporarily and will be removing it and doing his own stripe for $50 that will not expose any silver around the bowtie or at the ends. I ended up not being a fan of the grille accents, so I took them off too. The only thing I ordered that I liked and/or lined up properly was the tinted taillight inserts from Bigworm. I highly recommend those. Sent from my SM-G920V using Tapatalk Last edited by Copperhead; 05-20-2016 at 06:13 AM.