Quote:
Originally Posted by samsumon
also, what cable you running from the review mirror to the detector ?
|
This is the MirrorTap for the C7/gen6 mirror:
https://store.blendmount.com/mirrort...007-p2195.aspx
It works with the standard and the auto-dimming mirrors. You tap the purple wire for power, and black for ground. Below are my install pics on my C7 w/standard mirror.
Notched the mirror harness cover with my Dremel.
MirrorTap wire run with cover back in place.
BlendMount installed.
Initial hanging.
Adjusted, aligned, and powered up (before I tucked the wire).
